There are also a lot of things to pay attention to when installing the pvc soft board. Note that the cutting should be carried out according to the actual size of the floor of the room. When cutting, lay the soft pvc soft board flat on the ground or the operating platform, draw a cutting line on the board, and cut it with a V-shaped slit knife. The edge of the board should be cut into a smooth groove, and the angle of the groove and the mouth when the two boards are assembled is about 55 degrees. The day before the soft pvc floor is officially pasted, it should be pre-laid by division. When pawning, try to take care of the same color tone and the same thickness.
The pvc soft board is basically in the form of a soft board. When the PVC material is thin, it can be done like a plastic film. For this type of product, you must pay attention to it. Although the PP board manufacturer introduced It is said that this type of product has excellent toughness, but it is also necessary to pay attention when using it. Try not to touch sharp objects to avoid damage to the PVC film. Its acid and alkali resistance is compared with PP board. There is also no strong potential, so for PVC sheets, try not to make contact with some acidic items.
