Because the current PP board has a good environmental protection effect, it is said that the use of PP board is more and more in place. PP board manufacturers often introduce not only the use of PP board, but also Choose some other plastic sheets, for example, the current use of PVC sheets is also very good, for the use of PVC sheets, careful use can play a maintenance effect.
There are also many things to pay attention to when installing the pvc soft board. Note that the cutting should be carried out according to the actual size of the room floor division. When unloading, the soft pvc soft board should be laid flat on the ground or operating platform, and the cutting line should be drawn on the board surface and cut with a V-shaped slit cutter. The edge of the board should be cut into a smooth groove, and the angle of the groove and mouth of the two boards is about 55 degrees. The day before the soft pvc floor is formally pasted, it should be pre-laid according to the grid. When paving, try to take care of the same color tone and the same thickness.
PVC soft boards are basically in the form of soft boards. The thinnest PVC material can be made like a plastic film. For this type of product, you must pay attention to it when using it. The PP board manufacturer introduces Although this kind of product has good toughness, it is necessary to pay attention when using it. Try not to touch sharp objects to avoid damage to the PVC film. Its acid and alkali resistance is also compared with PP board. There is not much advantage, so for the PVC sheet, try not to do some acidic contact.
