What Thickness Of PVC Film Is Suitable For Protecting Mattresses?

Mar 14, 2025 Leave a message

1. Thickness parameters under basic protection requirements

For short-term storage scenarios, it is recommended to use 0.08-0.12mm specifications. This type of film has the following characteristics: tensile strength can reach 18-22MPa, and the right-angle tear force is maintained at 40-50N/mm. It can not only meet the high-speed winding requirements of the baler, but also withstand the conventional friction during transportation.

 

2. Optimization plan for long-term storage

When the storage period exceeds 6 months, it is recommended to use 0.15-0.18mm thickened film. This type of product extends its service life to 2.3 times that of conventional products by adding anti-aging agents, and the moisture permeability is controlled within 5g/(m²·24h). It is particularly important to note that the increase in thickness will increase the material cost by about 30%, but it can reduce the hidden cost caused by the rework rate.

Vinyl PVC Film Soft Sheet
PVC Crystal Table Mat

3. Functional additional requirements processing

For special needs such as dust and mite prevention, it is recommended to use a 0.12mm substrate composite functional coating solution. Through micron-level coating technology, the antibacterial layer is added while maintaining the flexibility of the film, so that the antibacterial rate reaches 99.6%.

4. Key control points of production process

In the specific production process, it is necessary to focus on monitoring three indicators:

1) Thickness tolerance is controlled at ±0.005mm;

2) Haze value is less than 15%;

3) Friction coefficient is maintained in the range of 0.3-0.5.

We use a thickness gauge imported from Germany for real-time monitoring, combined with precise control of the melt flow rate, to ensure the uniformity of the thickness of each roll of film.