How To Waste PVC Coasters #2

Sep 24, 2021 Leave a message

                                                       How to waste PVC coasters #2

Materials: A glue, B glue, hot melt gun, PVC table mat, orange lemon dry

1. Lay the dried orange flat on the PVC mat, draw irregular shapes on the PVC mat with a hot melt gun, and make the shapes higher than the dried orange (to prevent the drip from spilling)

2. Mix AB glue in A ratio of 3:1(for example, 30 grams of glue A and 10 grams of glue B), mix well and pour into the irregular shape. Then put the glue into the middle of the orange and let stand for 24 hours.

3. Mix the AB glue again and pour it into the irregular shape. Make the glue higher than the dried orange, and let stand for 24 hours.

4. Tear off the solidified coaster from the PVC mat, use a blade to make an incision at any place of the coaster, spray around with alcohol, and remove the hot melt glue around easily.

_202109241705148C48~1