

Three buyers from Vietnam flew in overnight and came straight to the workshop. No tour, no meeting room. They wanted the machine run, and they wanted to measure what came off the end.
What we ran
1. Rear shaft. Roll on, web over the guides, held on centre.
2. Insertion head. Hem opened, magnetic strip fed in beside the PVC. Strip and web travel together from here.
3. Servo feed, then the blade. Measured pull, then the cut. Set the length once.
Everything upstream decides everything downstream. Let the web drift a millimetre at the head, and that millimetre is still there at the blade.
What they checked
Check How What it exposes.
Length spread Ten cuts, one setting, stacked Feed slipping; roller pressure set for a different film
Strip seating Thumb along the hem, every section A wrinkle that becomes a curtain hanging off the door
After an hour Two hours continuous Tension drift as the film warms and the roll lightens
The third is the one that decides whether the machine survives a night shift. Most buyers skip it.
Why bother flying
Film varies by supplier. Magnetic curtain film is thinner and softer than the clear strip most plants run.
A machine set for 0.30 mm behaves differently on 0.20 mm.
You cannot see that in a photograph. Anyone can quote a machine.
Watching one run on film you did not bring is the only honest test.
What a day does not settle
Voltage and phase. The spare set of guides. Freight terms. Those go on the order, not on the shop floor.
A trial answers technical questions. A machine bought on price and then found wrong for the film is the most expensive kind of cheap.
About us
Baoding Yashen Technology Co., Ltd. makes PVC strips and the machines that process them in Baoding, Hebei. CE, FDA, RoHS, and REACH. Come and run your own film on ours before you sign. Bring a tape measure.
























